Re: Allow specific intra-SSID traffic

kaurs · 10-03-2023

Description This article describes information on how to configure a local device manually in the remote subnet of the IPsec tunnel and access it from the remote side. Scope FortiGate, all firmware. Solution The purpose of this article is to explain ...

kaurs · 05-17-2023

Description This article describes some information about issues while setting up source-ip for FortiManager in Central-mgmt. Scope FortiGate, all firmware. Solution When trying to set source-ip for FortiManager in the Central-mgmt settings of FortiG...

kaurs · 11-20-2022

Description This article gives information about the vci-match enable/disable option. Scope FortiGate. Solution Connected devices are not able to get an IP address from DHCP server configured on FortiGate's interface and get the following error. SC-F...

kaurs · 11-12-2024

Hi, In tunnel mode, the traffic is completely blocked between 2 wireless clients on same SSID with block intra-SSID traffic option . Since both clients are connected to same subnet, firewall policy may not help here as policies are supposed to route ...

kaurs · 07-25-2024

Hello,From the description, topology looks good. You are already using sdwan so that will take care of tunnels redundancy. And it is normal to have multiple tunnels on the HQ side as well. https://community.fortinet.com/t5/FortiGate/Technical-Tip-Con...

User Statistics

User Activity

Technical Tip: How to configure a local side device in remote subnet of IPsec tunnel

Technical Tip: Issue setting up source-ip for FortiManager in Central-mgmt

Technical Tip: Devices are unable to get an IP address from DHCP server

Re: Allow specific intra-SSID traffic

Re: Multiple IPsec tunnels between head and branches, using SDWAN

Re: Allow specific intra-SSID traffic

Re: Multiple IPsec tunnels between head and branch...

KCS