Description This article describes what to check on FortiGate when
polling from SNMP manager does not work. Network topology Scope FortiOS.
Solution 1) The SNMP must be configured (for versions 1 and 2c the same
community string must be used) and the...
DescriptionWhen configured custom internet services overlap or one
object is subset of another like the following example: # config
firewall internet-service-custom edit "custom-1" set reputation 3 set
comment '' # config entry edit 1 set protocol 6 ...
DescriptionFortiOS supports RSA-PSS signature algorithm starting version
6.0.x.Recent MS Windows update 2004.19041 introduced new schannel
features, ie. TLS 1.3 support, including RSA_PSS signatures.In case the
authentication is done using crypto car...
DescriptionIn FortiOS 6.2, the behavior of the ISDB has changed. The IP
address can be part of several services.The following policy should
allow traffic to Microsoft outlook service based on ISDB object
"Microsoft-Outlook" Normal 0 false false false...
DescriptionThis article explains how to use out-of-band management on
standalone unit without using VDOMs.Unit should use dedicated management
interface for management and should connect to the Internet through this
management interface for all manag...
Hello Thomas,If I am correct the 172.16.20.x is the network configured
on the internal interface, right?FortiGate listens on some wan interface
with another IP, correct?And you are trying to connect to this wan IP
(which is represented by VPN..com) w...
o.k. I see that is basically the default.However in this case, if the
wifi users get IPs from 192.168.68.0/24, then this WiFi-AP must do the
NAT and translate the traffic to 192.168.1.x, and this ingresses port1
on FortiGate, correct?If this is so, t...