Technical Tip: Resetting a lost admin password

ighita · 11-30-2022

Description This article explains a case where, after configuring the FortiClient EMS to import a Web Filter profile from FortiOS, the traffic is dropped by the local-in policy. Scope FortiGate and EMS FortiClient Solution Importing a Web Filter prof...

ighita · 09-02-2021

DescriptionBefore FortiOS 6.2.2 the Wildcard FQDN Addresses have a section in GUI under the 'Policy & Objects'. SolutionSince FortiOS 6.2.2 the section was moved to SSL-inspection.New location from GUI: Security Profiles -> SSL/SSH Inspection, edit c...

ighita · 08-22-2021

Description This article describes how to configure password authentication using a remote TACACS+ server for a system admin user, while the authorization is done on the FortiGate. Scope FortiGate.Solution Add the TACACS+ server to the FortiGate. Fro...

ighita · 07-13-2021

Description This article describes how to configure the health check for SD-WAN links with high latency. Scope FortiGate.Solution With the default settings, the performance SLA will show a link with latency higher than 500 ms as down: diagnose sys sd...

ighita · 05-23-2020

Description This article describes how to show blocked pages by application control.When multiple security profiles are enabled on the same policy, application control does not show the blocking page. Scope FortiGate.Solution In order to show the blo...

User Statistics

User Activity

Troubleshooting Tip: FortiGate configuration to allow EMS to import a Web Filter profile from FortiOS

Technical Tip: Wildcard FQDN Addresses location in newer FortiOS versions

Technical Tip: How to configure TACACS+ user authorization

Technical Tip: How to configure performance SLA for high latency links (>500ms)

Technical Tip: Show blocking page with application control

Technical Tip: Resetting a lost admin password

Technical Tip: How to delete the default 'admin' u...

Technical Tip: File System check recommended messa...

Technical Tip: How to enable Keyword Blocking usin...

Technical Tip: How to configure logging in memory ...

KCS