Hello, i try to ping between 2 ipsec tunnel IPs, but it does not work.I
have a FGT 101-E with these config:config system interfaceedit "VPN_W"
set vdom "root" set ip 10.102.0.6 255.255.255.255 set allowaccess ping
set type tunnel set remote-ip 10.102...
Hello, since update 6.4.4 FortiOS we have a problem to connect to owa
from desktop when using SSLVPN webmode. Login to SSLVPN is possible. The
bookmark to OWA will load the login page for OWA. After login OWA wil
show short "loding inbox" and then we...
Hello Community, I've to set two different PSK at a site-to-site vpn
ikev2 tunnel. The gui or cli will only set one key for psk. I've to set
up a tunnel to a lancom firewall, there is a psk configured for local
and one for remote.How to set two diffe...
Hello, I use the forticlient vpn an android 8.1 for sslvpn. I would like
to use client certificates and username/password to authenticate. I need
to use the certificate store from my android device to select the client
certificate. At the moment only...
Hello Toshi, thanks for your answer, but I don't know what you mean. Do
I need a phase2 for a transfer net between the IPs I've set at the
tunnel interfaces? And what should be local and remote net?I've change
at the tunnel interface the remote IP Ne...
Hello Toshi, thanks for reply.I'm loking for a way to check the tunnel
without the need of systems behind the tunnel endpoints. Ping between
the nets behind the tunnel is possible, but i want to ping the IPs of
tunnel interfaces.Is it possible from t...
We've solved a similar problem with FortiClientVPN, we get the msi file
from %appdata%/local/tmp. So you must start the installation process
only to one client pc and put the file from there. The Problem we have
is to deploy the vpn configuration. On...
