Hi EveryoneIm Stuck with an site to site Configuration. I was able to
setup the Tunnel between Fortigate and Netgear. Configured Firewall
rules. But i cant ping from either nor other side. Has some one an
similar Configuration? What information do i ...
Hello Im trying to use my internal DHCP-Server for VPN users. But im
only get the Ips from the Client Address Range in the VPN Config. I
changed also the internal interface to this config: DHCP Server Enable
Advanced... Mode Server Relay DHCP Server ...
Good MorningProblem Solved . There where 2 Issues. First one was Wrong
Subnetmasking. Second was a wrong routing entry on the Netgear. Thx for
all the Helps. RegardsChristian
Hi SumoHere is the log: id=20085 trace_id=17 func=print_pkt_detail
line=4420 msg="vd-root received a packet(proto=1,
192.168.222.144:1->192.168.5.1:8) from internal. code=8, type=0, id=1,
seq=26."id=20085 trace_id=17 func=init_ip_session_common line=...
Good Morning Yes i have. But on all doc's is written that i have select
VPN. But i don's see any VPN Options on Routing creation. I Just can
select Network.Bildschirmfoto 201..-14 um 08.41.02.jpgHere is the
Networkview.wan1 46.xxx.xxx.xxx 255.255.254...
