hello, i need to track the ip of local pc when accessing local destined
vip via external ip (called hairpin if i’m correct), but instead i’m
getting the local interface ip of the fgt unit. according to
http://kb.fortinet.com/kb....do?externalID=FD339...
hello everyone, 2days ago we decided to wipe and update the
fortianalyzer to the latest firmware. it went smoothly except that no
log transfer between the fortigate box and fortianalyzer is happening.
logging was working on the old firmware (faz100c ...
hi all, as shown in the image the device identity based policy is not
working, however i am quite sure it was working when i made it months
ago. i have checked the device definition objects, recreated them,
recreated the policy but nothing seems to w...
hello everyone. im using a FAZ-100C with MR3_p3, i want to delete the
data in Log&Archive>Archive Access>IM, but so far i have been
unsuccessful. ive tried to delete the IM data by clicking the Brush icon
(Delete Associated DLP archieve files) at Log...
hi, i have replaced the disk of faz100c two times before. did not use
any of the mentioned commands. just replaced the disk and reformatted
the device with new firmware from tftp via the boot loader and extra
rebooted 1-2 times. during the reboots wh...
update: due to the fgt was in active use i didn't had the chance to
reboot the device. last night during off time i did reboot the fgt and
after the reboot logging started to work for a few minutes, and suddenly
stopped again.
