Hello, I have a FortiWiFi60D device that's behaving rather strangely.
I'm experiencing two issues, but I'm not sure if they're related. The
first issue is that WiFi drops intermittently throughout the day. It
seems to happen right around lunch time w...
Hello, I'm trying to install an existing CA certificate and according to
the documentation here
http://help.fortinet.com/fos50hlp/52/index.html#page/FortiOS%25205.2%2520Help/Certificates.041.21.html
I should be able to... 1.After you download the roo...
Hello, I have two networks setup: 10.1.10.0/24 (lan) and 10.2.10.0/24
(Wireless). I have DHCP enabled for both ranges, but for the Wireless
network I have the DHCP range setup for 1 -- 99. I have a wired device
that needs to be on the same network as...
PIDDLAW wrote:look in the older firmware images folders.they stop
distribution of stand alone ssl client a while ago it seems to us.
PIDDLAW, Thanks for the suggestion. If anyone else is looking for the
simple SSL VPN client for OSX (without the ads ...
jvanderzee wrote: I did the 0 ads setting on the Windows version. I have
not tried it on OSX. I would suggest contacting support and seeing if
they know which version was the last one to support the ads removal tag.
Alternative solutions would be use...
neonbit wrote:Hi Newbie, If you're just looking for an SSLVPN client
without IPSEC support then I would recommend staying away from the
FortiClient and using the standalone SSLVPN one instead. It's much
smaller, easier to use and works on Windows, Ma...
jvanderzee wrote:If you use the FortiClient 5.2.0 (Download from your
support login), backup the config and restore with the 0 tag
altered (From 1 to 0) it will remove the ads for you. jvanderzee, did
adding the 0 to your config actually work for 5.2...
Thanks to both of you for the guidance. After looking into setting up a
software switch, I found this document which goes into the details of
setting one up:
http://docs.fortinet.com/d/fortigate-sharing-the-same-subnet-for-wifi-and-wired-clients
The ...
