Hallo I am using a 60D and store the system configuration through
FortiExplorers GUI. The full backup size is 160 kb and sometimes it
stores only about 50 kb or less. Has someone experienced the same
behaviour and is this a known issue in Version 5.4...
Hello I am trying to establish a VPN connection between a Fortigate 60D
(v5.4.0) and a LANCOM 7100 VPN and have some problems. The peer IDs,
passwords, DH groups and proposals are from my point of view correctly
set in both routers. The connection sh...
Hello I have different configuration versions available for the same
Fortigate unit depending on the later use. The Fortigates are goingto be
installed in different production units. I am looking for some sort of
comment field where I can insert my s...
Hello I have a problem with the passive FTP transfer. It gets connected
but the data transfer does not work. Active FTP works fine. Behind the
router I have several FTP server which are addressed with the same
external IP but different ports. This wo...
Hello The Fortigate 60D is used for a small industrial network where it
just does some NATing from IPv6 and IPv4 into IPv4. The complete network
is installed inside the customers network. Security is not the most
important because this is the custome...
When I do the backup immediately after the one with 50 kB or less it
stores the full 160 kB. When I open the files and compare them I can see
that it stops somewhere in the first third and the rest is not stored in
the the smaller file. Sometimes For...
HiI have the VPN connection working now. It was a problem with the
remote/local IP in my 60D. Unfortunately I can not get any data through.
At the moment I am not sure where the problem is. The wizard did the
setup for the IPv4 policy and installed a...
Hello JohnDepending on who starts the FTP session I would start looking
at blocked FTP ports or the FTP session helperin the router? Is it in
place and if you use another port for FTP you might have to implement a
new one. Wireshark might help to see...
SCP is off course on option. Unfortunately changing this involves more
than just a modification on the tftp server to accept scp. The Fortinet
and its predecessor are installed in a lot of similar installations of
an industrial application and change...
I have recently changed to a Fortinet router from another manufacturer
and at the moment I am in the process of copying the functionality from
the old one into the new one. With the old one it did work. As I am not
so deep into tftp I do not see the ...
