Hello,I'm having problem with high cpu on my FGT, the process that is
eating resources is miglogd, this is the output from top command:Run
Time: 0 days, 4 hours and 47 minutes6U, 0N, 93S, 1I; 1838T, 1201F
miglogd 1077 R 87.8 1.3 httpsd 122 S 5.3 1.6 ...
Hello, i have a Fortigate 90D that is working pretty well. I'm having a
problem in configuring a VIP to let an external application access a
badge reader in my local LAN via telnet on port 9999, there is an issue
(I believe) in the local segment of m...
Hello all, i need to create an IPsec VPN with a Public Authority that
needs to reach an FTP server in my local network (192.168.0.0/24). They
are expecting to reach my machine through a subnet defined by them that
is 10.50.41.208/30, my ftp server is...
The host is directly connected through one of the FGT' switchport, it
sound very strange to me that he's unable to reach it. By the way, this
is my routing table:Fortigate # get router info routing allS* 0.0.0.0/0
[10/0] via x.x.x.x, wan1C x.x.x.x/29...
My configuration looks almost identical, except that i don't have setup
custom address nor service: config firewall vip edit "badge reader" set
extip x.x.x.x set extintf "wan1" set portforward enable set mappedip
"192.168.168.210" set extport 9999 se...
I changed cabling connection: now the device is attached straight to one
of the FGT' switchport. I've also changhed ping-options as you suggested
but nothing changed: I can telnet to the device from one of the LAN'
client but telnet still doesnìt wor...
You're right, I was supposed to set wan1 as source interface, I just
tried but unfortunately nothing changed, i still cannot telnet to the
device from public ip nor from the firewall.Tomorrow i'll try with
connecting the other end of the cable straig...
Ok perhaps I've misunderstood your suggestion and the policies were
messed up. This is my first version of the VIP/Policy, before opening
this thread: config firewall vip edit "Badge Reader VIP" set extip
x.x.x.x set extintf "any" set portforward ena...
