Hi all, Not sure where this topic should be posted since it overlaps
between IPSEC site to site and LDAP authentication, but i'll give it a
go here. I'm having a peculiar request: 1. 2 sites on a site to site VPN
- Site A (main office) & Site B (bran...
I'm having a peculiar issue but i'm not sure where to post - since this
forum covers HA topics, guess its appropriate: I have a pair of 100D
running on firmware v5.2.8,build727 (GA) - connection is on a 500Mbps
symmetrical fiber - each subnet is rate...
I'm wondering if anyone has encountered this before and hope this is a
proper section to post this, mods if this is wrong appreciate some help
to shift it to the correct forum section. We've installed a Fortigate
90D for our client and their IP phone...
Hi guys, Just deployed a 60D with 5.20 GA firmware, i'm linking it up to
2 connections: ISP 1 (WAN 1):Static IP ISP 2 (WAN 2):Dynamic IP Ideally,
if ISP1's gateway can't be reached, the unit should default to ISP2
(ignoring the fact that services fac...
Hi guys, Facing the following problem: Server / AD is running on Windows
2012. Test connection to AD is successful when I click Test. But
clicking on " Query Distinguished Name" button results in a query
failed. Below is the code i' m getting: MIDSTA...
200D stopped issuing IP addresses. Rebooted it and got some SDCard
errors in the console screen - the unit never came back. I've got a 100D
on 5.2.3 b670 (GA) that's doing fine *crosses fingers* - have downgraded
1 of my new 100D to this firmware (sh...
Is there any resolution to this issue? I have got a 14 day old 200D
that's exhibiting this issue, for now I daren't restart the unit. Going
in by SSH and doing a show command - only a couple of line display and
the whole SSH session hangs, we'll need...
mac wrote:Hi ,First, you should set ISP1 & ISP2 PING detection methods
to GATEWAY, I'm using version 5.2.2 does not operate in this issue. mac
Thanks for your reply, Did you follow the guide to create the "Virtual
WAN" interface? Understand there are...
emnoc wrote:OP, you need to look at the virtual-link options you have
numerous choice from load-balance type and spill over per member set
load-balance-mode source-ip-based Select next hop based on source IP.
weight-based Select next hop based on wei...
Thanks Dave! That' s already been set via CLI. What I meant was a
diagnostic test using regular bind not simple bind. Anyhow, we' ve
managed to get it working but Windows 2012 is spewing errors on DNS and
AD, due to this " mod/hack" , Windows is now ...
