You are leaving our website

ytlpsnet · 11-03-2016

Is there any way that i can search for more than 100 ip addresses? What i do the searching in analyzer as below: srcip=1.1.1.1 or srcip=2.2.2.2 or srcip=3.3.3.3 And this way will allow maximum 30 ip addresses to key into search field, so is there any...

ytlpsnet · 08-28-2016

Hi, we have couple of deny rules that deny certain ip addresses (lot of them) and services, for example for trust to untrust, and then deny and logging. So we wonder if put that rule on top will cause more memory used, or we should put it on the bott...

ytlpsnet · 07-19-2016

I know from the dashboard under license will show as below, but how do i see it from the last few month?Used GB/Day Today(Jul 20, 2016)0.27 GBJul 19, 20160.61 GBJul 18, 20160.61 GBJul 17, 20160.25 GBJul 16, 20160.26 GBJul 15, 20160.63 GBJul 14, 20160...

ytlpsnet · 01-17-2016

Let's say 1 user ABC has connected wireless (192.168.1.100) and wired (172.16.1.100), at this point no issue for FSSO, but once the user disconnected from wired, and use wireless to continue, then FSSO will not able detect user ABC. (it happens rando...

ytlpsnet · 11-09-2016

awasfi wrote:Hello, It's easier to run a report filtered by the source IP addresses using comma separator.You can add multiple IP addresses to the same srcip filter, however I'm not sure how many IP addresses the filter will accept. If the filter acc...

ytlpsnet · 11-06-2016

James.F.Holmes wrote:Both suggestions above (Wild card and the IP range) are better that what I would have done :), but I would add that you can search by CIDR notation as well: srcip=10.1.1.0/24 for example. my source ip addresses are not under the ...

ytlpsnet · 11-04-2016

I know there is enable column filter option, once you enabled it then you can filter only 1 ip address, i need more than that...

ytlpsnet · 08-28-2016

use a linux server, then config a script to schedule backup as below: #!/bin/bash #linux/UNIX SERVERS="your_fortigate_ip_address" # SSH User name USR="your_fortigate_username" PWD="your_fortigate_password" timestamp=$(date +"%y-%m-%d") # connect each...

ytlpsnet · 07-26-2016

scao_FTNT wrote:FAZ record GB/Day usage in event log, so you can do search in System Settings - Event log for " message=*"Used log GB/Day"* " Thanks Simon Yes, i managed to see the Used log GB/Day. Thanks a lot!!!

User Statistics

User Activity

How to search traffic log with multiple source ip addresses (more than 100 ip addresses)?

What is the best practice for deny rules? On top or On bottom?

Is there any way to see the log received per day for last few month?

FSSO not able to detect user after ip address changed

Re: How to search traffic log with multiple source ip addresses (more than 100 ip addresses)?

Re: How to search traffic log with multiple source ip addresses (more than 100 ip addresses)?

Re: How to search traffic log with multiple source ip addresses (more than 100 ip addresses)?

Re: Automated Full-config backups

Re: Is there any way to see the log received per day for last few month?