I have a 60E with 2 WAN connections: a coax cable broadband connection
on WAN1 and a LTE connection on WAN2. I have fail-over configured and
all traffic properly fails over to WAN2 when WAN1 goes offline. The
issue is that some of the traffic is VOIP...
I already have a SSL VPN configured on a Fortigate 80E ( v5.6 ) that is
functional. Those users have full access to the LAN. The portal they are
assigned to is the default "tunnel-access" with IP range
10.212.134.200-210. I now need to create a conne...
Fortigate 80E with firmware v5.6 running. There is a user group created
called VPNUsers that is an LDAP lookup to AD on an internal server The
VPN Users group is assigned to the SSL Portal called tunnel-access.If
users are in the appropriate group in...
ede_pfau wrote:I think this is what you need: pull wanX down if wanX
fails the ping server test.Look at this KB article:
https://kb.fortinet.com/k....do?externalID=FD44679 The rub is that when
wan1 comes back online, neither ping test will fail.... s...
toshiesumi wrote:That's the design of priority. After wan1 comes back
up, when the server side of voip sends something toward the phones to
verify if they're still alive with the wan2 public IP, the FGT routes
the response from the phones toward wan2...
toshiesumi wrote:Do you have two default routes in the routing-table
when both are up? Then you might want to stop its injection by both
circuits (set defaultgw disable) and put two static default-routes in
with different distances to have only the m...
