In FortiClient 5.4.2 for Android, I can go to Settings, Import
Configuration and I can successfully import a .conn file but .sconn
(encrypted) files will not import for me. It does prompt for a password
when I choose the .sconn file, but it gives no ...
I have a new 300E running 5.6.3 out of the box. No interfaces are
configured yet. When I go to create a new interface, I have the option
for Software Switch, but not Hardware Switch. Is there no longer a
differentiation or is it simply not available ...
The manual describes Fast Roaming as: Fast Roaming Users in a multi-AP
network, especially with mobile devices, can move from one AP coverage
area to another. But, the process of re-authentication can often take
seconds to complete and this can impai...
This is the first time working with a FortiGate 200B-POE. Is it possible
to bridge the " switch" interface (the 8 PoE ports) with one of the ASIC
accelerated interfaces? I would like to use the PoE ports for wireless
access points only but keep them ...
Gik wrote:Hello srappaport,Old topic, but I'm interested if it was
"mystery solved" with operating system 5.6 or only after an upgrading to
version 6.x Thanks in advance and best regard "Mystery solved" was in
response to kurtli_FTNT who said that ha...
Unfortunately, "config system physical-switch" and "config system
virtual-switch" are not valid commands on the 300E using 5.6.3. I only
have "config system switch-interface" and when I create a new entry, it
appears as a software switch.
Thanks for looking into that, Ede.Out of the box, all ports are
individual interfaces - no "internal" or "lan" interface, just
port1-port28, ha, etc.When I go to click Create New, Interface, I get
only the following options: VLAN, 802.3ad Aggregate, ...
