Setup a Fortigate 60E with the SSL-VPN and it works fine for most users
but one user is having a permission denied (-455) error which I cannot
work out what is wrong. The password is correct, 2FA code on Forticlient
has been setup correctly (twice no...
If a user goes to a HTTPS site it doesnt automatically come up with a
Fortigate blocked this website warning. The user has to click the site
not secure warning then it shows it. Is there something I haven't setup
correct?
Is it possible to have VLANs on the Fortigate 60E without a Foritgate
Managed Switch? I currently only have a few unmanaged switches but need
3 networks on the firewall to be completely separate. One method I have
found seems to work but not sure if ...
I have setup a Fortigate 60E previously where it allowed an interface to
select Internal1,Internal2, etc which is basically port1, port 2. This
allowed me to set different ports for the different networks running
through the firewall. However the lat...
I wanted to change from software switch to hardware switch (so i can use
seperate ports for eahc network) but had to disable software first which
then made the router inaccessible. So i go to my Fortigate box (always
keep everything) and it must not ...
Hi, I have this exact issue too and just posted a question. Did you find
any answers? My experience is all users work fine except for 1 who gets
this error but occasionally it works for them. Its not to do with the
device as I can login fine on the s...
Ok thanks for the reply i'll look further into VLAN explanations, I have
a basic understanding but not sued them for a long time. However my main
question is without a VLAN compatible switch is my other method for
splitting the traffic suitable? [ol]...
