We moved and can only get AT&T fiber 25 Mbps from a Gigabit fiber. I
called Wowway.com. They had 2 devices on their list Arris Surfboard
CM8200 Netgear CM1000I need to be able to connect them to my WAN port of
the 60E. AT&T gave me a BWG-210-700 with...
I am working on my Cisco CCNP. I am still learning IPv6. I setup a Cisco
Virtual Lab. My IPv4 setup Internal2 : 172.16.1.1 /24 vmnic1: FLAT :
Internal2 : 172.16.1.1 /24 I have these static routes point back to
172.16.1.203 for use in Cisco VIRL labs ...
I set the NVG-589 into bridge mode following
https://forums.att.com/t5/AT-T-Internet-Features/How-to-put-the-Motorola-NVG589-in-bridge-mode-or-as-close-as-you/td-p/3552057
WAN1 plugged into LAN port on NVG589. WAN 1 has the IP, gateway, etc. I
can ge...
I installed the 60E. She VPNs to work from home. Her Cisco Anyconnect
3.1 was working first day. Now gets two errors web authentication and
The service provider in your current location is restricting access to
the Internet. I checked the solutions o...
My DLINK router died. The DLINK router configuration was just one
subnet. I purchased a FWF-60E to replace it and its coming tomorrow. I
did get 24x7 support for it. I use a 800C with HP layer 3 switches in my
data center. 800C has VLANs configured o...
The green broadband port is what AT&T connects. They convert the coax at
my current house to it. At my old house they brought a pure fiber to a
demarc and then connected to the same port. I am going to ask for a
DG3450 gateway device instead of the S...
I have the BWG-210-700 in IP Passthrough mode. WAN1 shows the Public
Address for AT&T. I added into my 60E the DNS entries that are not
passed through. I found that WOW has the DG3470 Gateway Modem that can
do bridge mode.
What I want to do is what I have on AT&T side, IP Passthrough. The WAN
address from AT&T BWG-210-700 is on WAN1 currently. This is what I want
from WOWWay but so far none of their devices does IP Passthrough.
I appreciate everyone's help. The 60E is at my house not in my data
center. At home, My 60E is just 8 interfaces each with DHCP on the 60E.
I don't even do VLANs at home. First 5 interfaces are to my Cisco
Virtual Lab. DMZ, Internal6 and Internal7 sp...
I believe WOWWay is still coax to the device. I talked to Fortinet
support today. They said stick their modem in bridge mode and disable
everything else. It will pass WAN information to the 60E WAN2 port.
