Hey Everyone, i work with a FortiWiFi 60E with Firmware 6.2.6 Build1175.
I have created four SSIDs and set them to "Tunnel Mode". This four SSIDs
were assigned to a FortiAP-Profile. And the Managed FortiAPs are using
this profile. However, I created ...
Hey Everyone, i work with a FortiWiFi 60E with Firmware 6.2.6 Build1175.
I have created four SSIDs and set them to "Bridge Mode".This four SSIDs
were assigned to a FortiAP-Profile.And the Managed FortiAPs use this
profile.So far so good. Now i want t...
Hello Everyone if i need my exchange-OWA accessable from Outside i need
to create a Virtual IP.eg my public IP is 123.123.123.123 and my
internal Exchange IP is 192.168.1.1 So i want that 123.123.123.123 Port
443 maps to 192.168.1.1 Port 443. And her...
Hello everyone, The Firewall is a Fortigate 100E with Version 6.0.9
Build 0335 (GA). Is there a possibility to see all "Allows" and all
"Denies" with "diag sniffer packet"?Or else with debug mode? I know i
can see all denies in syslog.And i if enable...
Hello everyone, on "Dashboard -> System Information" it says "WAN IP -
Unknown". Do you know this issue?Do i have to allow specific ports /
Settings on WAN1? The Firewall is a Fortigate 100E with Version 6.0.9
Build 0335 (GA). I found something where...
Got the Problem.... DNS Request doesn't work. Following scenario:a
Branch-Firewall with Outside-Interface IP 123.123.123.123 and an
Inside-IF with 192.168.1.1a HQ-Firewall with Outside-Interface IP
999.999.999.999 and an Inside-IF with 172.12.1.1Both...
Hello, "It wouldn't fix the problem you have" -> you're right. Just
mentioned it because some people did this as "helpful workaround". "You
basically don't have internet" -> Thats the point. Internet connection
works. I have a working Site2Site-VPN a...
OK i have the solution. If i enable PING on the GUI the first time,
everyone can now Ping this interface.NOW i can make the configuration
like Oscar. After that only "set srcaddr 'YOUR TRUSTED IP'" can Ping the
Interface.Problem solved. My missunders...
