Re: Issue with FSSO Agent Communication on seconda...

jhussain_FTNT · 08-13-2024

Description This article describes how to enable 'httpmethod' and 'referrer url' parameters in the HTTP transaction logs for FortiAnalyzer or syslog or FortiSIEM Scope ForitProxy. Solution The default HTTP transaction logs in Fortiproxy do not includ...

jhussain_FTNT · 12-01-2023

Description This article describes how to update manually a Botnet database in an air gap environment. Scope FortiGate. Solution Manually updating the Botnet database in the air gap environment has been combined with the Internet Service definition u...

jhussain_FTNT · 05-04-2023

Description This article describes how many FortiGates can be connected to one FSSO Collector agent application for login information. Scope FortiGate, FSSO. Solution The FSSO Collector agent is installed on the Windows Server. It is possible to have...

jhussain_FTNT · 04-09-2023

Description Technical Tip-Duplicate session logs are seen in the forward traffic logs for long live session packets. Scope Solution When a large file from the Internet is uploaded, it is possible to notice multiple forward logs with the same session ...

jhussain_FTNT · 06-29-2022

Description This article describes how to configure the LDAP users as the Guest account provisioning sponsors. Scope FortiGate v6.4, v7.0, v7.2., v7.4, v7.6. Solution Creating an LDAP Server. Creating a user group using the configured LDAP server. Co...

jhussain_FTNT · 12-12-2024

Kindly verify both the collector agent IP address is added in DC02 as shown in the below image. Regards Jamal Hussain

jhussain_FTNT · 12-11-2024

Hi @mrmIT You must ensure that log events have been received by both domain controllers Also verify you are monitoring both Domain controller in the collector agent settings in DC01 /DC02. Regards Jamal Hussain

jhussain_FTNT · 12-11-2024

Hi, Please let us know if the collector agent is configured in active or passive mode. Normally, the Fortigate connects to the primary FSSO agent (DC agent 01) and retrieves the users showed in the logon user list. If a user A appears in the user log...

jhussain_FTNT · 11-28-2024

Hi, The WAP2 Enterprise authentication occurs when the client joins the SSID; following the successful four-way handshake and the client receives the IP address and is able to browse, the device does not need to be authenticated again. Client disconn...

jhussain_FTNT · 10-03-2024

Hi Have you configured firewall policy to allow traffic from SSID interface to wan interface. You can run the below debug logs and check the traffic is allowing by firewall policy diag debug flow filter addr x.x.x.x ---where x.x.x.x is the IP address...

User Statistics

User Activity

Technical Tip: How to enable 'httpmethod' and 'referrer url' parameters in the HTTP transaction logs for FortiAnalyzer or syslog or FortiSIEM

Technical Tip: Manual update of Botnet database in an air gap environment

Technical Tip: How many FortiGates can be connected to one Collector agent

Technical Tip: Duplicate session logs are seen in the forward traffic logs for long live session packets

Technical Tip: Configuring LDAP users as the Guest account sponsor

Re: Issue with FSSO Agent Communication on secondary DC

Re: Issue with FSSO Agent Communication on secondary DC

Re: Issue with FSSO Agent Communication on secondary DC

Re: Users Disconnect from FGT WPA2 Enterprise SSID Authenticated with Azure AD Domain Services LDAPS

Re: FortiAP 221E Broadcasts signal but has no internet connection

Re: Issue with FSSO Agent Communication on seconda...

Re: Release date for FortiOS 7.4.5

Troubleshooting Tip: Unable to take RDP of machine...

Re: Fortigate Policy route AP

Re: Active portal

Re: Release date for FortiOS 7.4.5

Re: not connect to anydesk network

Re: List users with last logon time exceeding spec...

Re: Problem with SSL VPN LDAP authorization at rel...

Re: FortiClient not working for one user on Window...

Fortinet Training Institute

KCS