I have a rather nasty issue facing me at the moment. Let me start with a
bit of history... We have been using the FortiClient with static Virtual
IP settings for over a year without issues. Within the last 2 months,
the Fortinet Virtual Adapter start...
I have been told many times that " this process doesn' t work" , yet
every time I have been in front of the dysfunctional box it worked just
fine for me. In your examples above, bcpbFG100A3806205245 would be the
password for the maintainer account.
Unless something has recently changed, this always works. If it isn' t
working for you then you are either not starting from a cold boot
(disconnecting power), using the serial number incorrectly (some have
dashes and some don' t), or you' re taking ...
Unless my math is wrong, 72.243.135.232 is the network address (first
IP) of your subnet. A usable range would be 72.243.135.233-238, with 239
being the broadcast address. For an easier to comprehend example, you
also would not be able to use 10.10.1...
Dynamic websites are often an issue with SSL-VPN. OWA is a good example
- it won' t load over SSL-VPN in web application mode. I haven' t tested
Sharepoint, but I wouldn' t be a bit surprised if it has similar issues.
Try doing a packet sniff: diag sniffer packet any ' host x.x.x.x' 4
where x.x.x.x is the host IP that is sourcing the traffic, and a 4 for
verbose level will give you the interface name that is seeing the
traffic. This should give you better visibili...
