Hi,Does anyone have information/reference about the payload or
attributes that are sent when the FortiGate is communicating to
FortiCloud in ZTP process?For example, maybe the hostname, serial
number, authentication ID, etc. Thank you in advance. Reg...
Hi,Can someone help me to explain about throughput in 'Top SD-WAN Device
Monitor' in FortiView?The graph shows the throughput more than
1GB/s.Meanwhile, the FortiGate only connects to LAN user switch with
100Mbps full duplex with provider uplink band...
Hi,I know this is not best practice to use same certificate on all
FortiGate for IPSec VPN Authentication.But I'm wondering, let say I
deployed Hub and Spoke with 10 branches connect to DC as hub.Can all
FortiGate use same certificate for IPSec VPN a...
Hi,We have created the SD-WAN and has 4 members.We also create default
route with sdwan enable.When we 'get router info routing-table static',
it only shows 3 SDWAN members.Why does the static routing table only
have 3 SDWAN members?FortiGate 61F Tha...
Hi,If the FortiGate has 2 default route but with different priority like
below: config router staticedit 1set device wan1set gateway
192.168.208.29set priority 10nextedit 2set device wan1set gateway
192.168.208.30set priority 20nextend Without the li...
Hi,So, technically it's possible to use same certificate on the
FortiGate branches to connect to the FortiGate DC in IPSec VPN, but it
requires to different in SAN or wildcard CN, is it correct?What will
happen when the certificate doesn't have SAN o...
