Fortigate 90G FirmVer7.4.5Default internal is VLAN ID 0.I tried to
change this VLAN ID 1,but errore poped up something like "cannont use
VLAN ID 1..." I want to use VLAN ID 1 ,because I want to fortigate
deliver VLAN ID 1,100,200 by trunk-port to cis...
I want to WAN2-port to Dedicated as Ethernet Trunk.Is this possible?Even
WAN2-port role is changed to LAN-role,there is no "Dedicated as Ethernet
Trunk".I have to choose port1~port6 using by "Dedicated as Ethernet
Trunk" ?
I'm testing Fortigate-VM-Evaluation adn EMS Client
Trial(Server),Fortigate-VM can't accept certificate of EMS
Client.Fortgate-VM:OS Firm 7.2.10EMS:7.0.7build0398Is there any possible
mistake to setup for EMS and Fortigate、or perhaps, Evaluation canno...
I tested SSL-VPN and IPsec Remote Access with Fortigate VM
Evaluation.But,it didn't work both.Is that Evaluation limitation?I found
Restrictions,as "Support low encryption operation only",that means I
can't use SSL-VPN and IPsec Remote Access?
I've read this,as well.I found this test below.1. if I use VLAN switch
→cannot create VLAN ID 1.2. if I use VLAN →can create VLAN ID 1, though
I'm worried about reserved VLAN ID document issue, which is written
"Fortigate do not work as exepected."I ...
Normally, i add to vlans under internal port,like port1 or port2...which
is changed toDedicated as ethernet trunk.That means port1 is going to be
trunk port. and can flow tag to other L2switch.and on this occasion, i
want to add vlans under wan2-port...
Thank you for repling,but it took still several days,since EMS,Fortigate
Evaluation started.not 15days past yet.Eventhough,I have to consider
this Evaluation version is very limited?