Hi all, I've been running a Fortigate 61E in LAG mode (ie: static) on an
Edgeswitch for some months now and it has worked well. I never managed
to make it work in LACP. Now I'm moving to a Unifi Switch, which only
supports LACP, and ... they don't ne...
Hi all, I have my Fortigate (61E running 6.2.3) with dual-wan for a
while, and a few external services : SMTP, IMAP, HTTPS. Up until now,
I've been using virtual IPs to redirect the traffic to the relevant
servers, hence purely based on ports, as eac...
Hi all, I'm trying yo use public keys rather than certificates for IPsec
VPN, a supported by a lot of vendors : Cisco, Mikrotik, VyOS/EdgeOS and
Linux distros. Any clue ?
Hi all, I know this has been debated many times, but still can't solve
it. I have a wildcard valid SSL certificate which I try to importe to my
FortiGate. Of course, I have all relevant information, including private
key. No matter what I do, it gets...
Hi all, For various reasons, I would need different users to use a
single VPN iOS IPSec tunnel to get to different subnets based on the
user. I can have them connect, and the XAUTH user is correct.Then I used
"set groups" in my firewall policy. The r...
ok... I did a few tests. They exchange LACPDU and stay in "negotiating".
I have tried active, passive, slow, fast, ha-slave enabled or disabled,
they keep "negotiating". I'm not a 802.3ad expert, but that sounds
wrong. Any output that could provide y...
Maybe but it has been supported for some months now. I will try to
debug. Thanks for pointing to the doc.(only issue is that this is on my
internal side, so I'm currently forced to debug through serial console).
Let me look deeper.
