Has anybody run in this before. I' ve actually got a policy in place and
it shows an increase in " count" but I can' t get traffic to pass. I' ve
looked at the KB article related to it and still can' t figure out why
traffic is denied. The logs slow ...
Version 4.3.x has 2 factor for admin login that seems to support SMS
without using FortiTokens so my questions is, how do you configure it?
Ive done the following but I' m at a loss at to what they are looking
for in the SMS Provider section for " ma...
So whats the deal with these? I' ve got a brand new FWF60c running 4.2.3
(wiped flash and loaded a fresh version via tftp server before starting
on it) with a very basic rule set and policies (3 policies) and today,
with ZERO users and ZERO traffic o...
Anybody know how to sniff with the FortiGate for a whole subnet? I want
to see all traffic to a specific external subnet. example: diagnose
sniffer packet external ' dst 192.168.12.0/24' 6 spits out an error:
pcap_compile: Mask syntax for networks on...
Any idea on what these are and how to fix them? I' m working on traffic
shaping and I saw in the tech note that all errors should be resolved.
I' m not " seeing" a problem so it might just be cosmetic. I' m thinking
about opening a ticket with Fortin...
I' m having the same problem with my FAZ however all my FGT' s that were
upgraded to release 5 prior to 5.0.7 work fine. I just upgraded another
FGT from 4.3.15 directly to 5.0.7 and it' s having the same issues as
well. I' m not wondering if it has ...
I don' t see it as a bug and documentation exits on it. Just search the
KB..I did.
http://kb.fortinet.com/kb/microsites/search.do?cmd=displayKC&docType=kc&externalId=10876&sliceId=1&docTypeID=DT_KCARTICLE_1_1&dialogID=43714791&stateId=0%200%204371630...
Thanks emnoc! It was the route. I had the route 0.0.0.0/0.0.0.0 to the
ssl.root and once I created a route for the IP' s I' m using for the
tunnel, everything started working.
already did that and still now go. Like I said, I have a policy so the
article doesn' t help. I even deleted it and re-created it and that
didn' t help. Looks like I' ll create a ticket with Fortinet.
ORIGINAL: ddskier That seems counter intuitive. Run " set ident-accept
enable" to disable it? Is that a type in the KB? or is that really the
correct setting? I agree but that' s what it is. All the documentation
(fundamentals handbook, admin handboo...
