Hello all! I' m running into a little problem recently and I' m not sure
why it' s happening. Here is the scenario: I have an inbound webserver
policy (just http and https) to a couple of webservers and I also have a
" webserver" IPS sensor applied t...
Has anybody run in this before. I' ve actually got a policy in place and
it shows an increase in " count" but I can' t get traffic to pass. I' ve
looked at the KB article related to it and still can' t figure out why
traffic is denied. The logs slow ...
Version 4.3.x has 2 factor for admin login that seems to support SMS
without using FortiTokens so my questions is, how do you configure it?
Ive done the following but I' m at a loss at to what they are looking
for in the SMS Provider section for " ma...
So whats the deal with these? I' ve got a brand new FWF60c running 4.2.3
(wiped flash and loaded a fresh version via tftp server before starting
on it) with a very basic rule set and policies (3 policies) and today,
with ZERO users and ZERO traffic o...
Anybody know how to sniff with the FortiGate for a whole subnet? I want
to see all traffic to a specific external subnet. example: diagnose
sniffer packet external ' dst 192.168.12.0/24' 6 spits out an error:
pcap_compile: Mask syntax for networks on...
I' m having the same problem with my FAZ however all my FGT' s that were
upgraded to release 5 prior to 5.0.7 work fine. I just upgraded another
FGT from 4.3.15 directly to 5.0.7 and it' s having the same issues as
well. I' m not wondering if it has ...
Thanks for the info. I wonder if 5.0.x has the same issue. This A-P
cluster is the last of our units on 4 and is slated for upgrade in the
next week or so. I may escalate the upgrade due to this issue as long as
5.0.x doesn' t have it.
Whoops...I forgot: Model: Fortigate FGT600B FortiOS: 4.3.15 (build 0672)
We are getting ready to move to 5.0.x in the next couple of weeks on
this unit. All my other FGTs are running 5.0.7 already.
I don' t see it as a bug and documentation exits on it. Just search the
KB..I did.
http://kb.fortinet.com/kb/microsites/search.do?cmd=displayKC&docType=kc&externalId=10876&sliceId=1&docTypeID=DT_KCARTICLE_1_1&dialogID=43714791&stateId=0%200%204371630...
Thanks emnoc! It was the route. I had the route 0.0.0.0/0.0.0.0 to the
ssl.root and once I created a route for the IP' s I' m using for the
tunnel, everything started working.
