Hi Team, I have a question about using DNAT and SNAT simultaneously. For
example, my global IP is 100.100.100.100/32. I want to enable RDP (port
3389) access to a local host with the IP address 192.168.10.10/32 from
the Internet.When a user connects ...
Hi.I guess config will look like below:------------config firewall vip
edit "vip_DNAT-8080-3389" set extip 172.17.200.200 set mappedip
"172.17.200.200" set extintf "Interface_v999" ※Your external interface
set portforward enable set extport 8080 set ...
I made some adjustments.Initially, it wasn't functioning with the
dynamic NAT pool, so I configured it as interface SNAT
instead.Additionally, in the firewall policy, RDP should be permitted
rather than the external port ("TCP_42424").To summarize, t...
Hi,May be this is a bug: (Bug ID:910829 Degraded traffic bandwidth for
download passing from 10G to 1G interfaces.)If your firewall’s firmware
is below 7.0.15, updating it can be helpful.Reference link
below:https://docs.fortinet.com/document/fortiga...
OK. Here is the sample configuration:--------config system admin edit
"test-admin" set accprofile "test" set vdom “VDOM-traffic" “VDOM-root"
set password ENC SH24/2SXi nextend config system accprofile edit "test"
set secfabgrp read set ftviewgrp read...
