Hello, We are trying to create a device type based network addressing
for our network.For example (limits may change);[ul]192.168.0.1 to
192.168.0.20 network equipments (fortiaps, fortigate ...) *fixed
ips[/ul][ul]192.168.0.21 to 192.168.0.50 servers...
Hello, We are using 1 fortigate 60d with 4 fortiapp 221c.We can not find
fortianalyzer 100 series products in our region and the price of
appliance based analyzer devices are a little high for our budget. We
are looking for a capable software based a...
Hello, We've recently upgraded our FortiAP's (221C) firmwares to 5.4
family.Also we've upgraded our fortigate firmware to 5.4 family. Right
now we can not access or fortiaps web gui.They are rejecting the
connection.We've tried to revoke dhcp release...
Hello, We are using a FortiGate 60D in our company.Right now we are
using 5.2.11 Build 0754 as firmware. When we check the update page of
the device 5.4 and 5.6 firmwares are listed in other releases tab of the
page. Which one is recommended for 60D ...
toshiesumi wrote:The first idea came up to my mind is separating those
by subnets instead of ip-range, like 192.168.0.0/27, 192.168.0.32/27,...
then assign vlan to each and configure on the FG. Then connect at least
one port to your switch on which y...
Thank you very much for your reply. I've found the problem :)It seems we
can not reach fortiap gui if we authorize the device with fortigate.I've
deauthorized fortiapps and i've managed to access their gui. I hope this
information will be helpfull in...
tanr wrote:5.4.5 has been pretty stable and seems to be getting a lot of
use. Haven't upgraded to 5.4.6 yet, but it is another bug-fix only
release so it is likely stable. We've been running a 100D and 300D on
5.4.5 for months now without issue. Our ...
