Hello Fortinet Community,I'm currently facing an issue with my
FortiNAC-F 7.2.8 (previously 7.2.7, upgraded in an attempt to resolve
this) when trying to connect to switches via the Validate Credentials
button in the device configuration. The credent...
Hi everyone,I'm setting up a FortiSIEM Supervisor All-in-one (AIO) with
version 7.2.0, but I've encountered an issue with the Collector.When I
go to Admin → Setup → Collector, there is no option to configure the
Collector’s IP or designate the server...
Hello everyone,I am encountering issues with setting up multicast
traffic in a Layer 2 environment. Although the PCs can ping each other
and are correctly connected to the Wi-Fi network, the VLC client is
unable to receive the multicast stream sent b...
Hello everyone, I’m back with another issue related to FortiNAC... In
the client's network infrastructure where FortiNAC is deployed, there is
an Explicit Proxy configured on the FortiGate.If I disable the proxy on
the test machine, the FortiNAC Capt...
Hi,I am using a FortiNAC-CA 7.2.4 (FortiNAC-OS) with a basic FortiNAC
license. Network Infos:The FortiNAC is connected via cable to a switch
and terminates on a FortiGate through port6 (0.0.0.0/0) with a VLAN stub
and VLAN Isolation. I have configure...
@ndumaj @ebilcari After experimenting with the parameters while trying
to connect via SSH from execute enter-shell, I was able to connect using
this command:ssh
-oKexAlgorithms=+diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-he...
The NAC is currently being implemented in the network.I tested the
following switches:Cisco IOS Software, C3560E Software
(C3560E-UNIVERSALK9-M), Version 15.0(2)SE4, RELEASE SOFTWARE (fc1)Cisco
IOS Software, IOS-XE Software, Catalyst L3 Switch Softwa...
Hi, I finally solved it by configuring the credentials in OMI with
kerberos-auth instead of ntlm-auth, and it worked. In WMI or OMI, ntlm
has always given me issues. I ended up not using the Agent because,
after reviewing the licenses, I realized I o...
Hi, I am inOrganization: SuperUser: adminScope: LocalI actually don’t
see Admin / Setup / Organizations.I see the Collector option under Admin
/ Setup; I tried to create a collector, but the problem is that I have
an AIO environment, and I don’t have...
