Hello all, We recently got 2 FortiGates 100F for in our newly bought
rack in a datacenter. With these 2 fortigates we also have 2 Dell EMC
S4128F-ON switches. When setting up the primary fortigate, everythings
works fine, internet connection is worki...
So if I understand correctly, going back to VRRP via L2 switches. If I
use the diagram below, it should work? With giving them a VLAN on the
switch as well.
To me, adding special VLAN's and adding the uplinks to one of the
switches adds complexity and breaks the HA of the system because if the
switch goes down the uplink disappears. As far as I can see and
understand in their diagram, switching from VRRP...
Thanks for the help so far Toshi. We don't have our own IPv4 ranges, we
use their IPv4 addresses. I don't want another 2 pieces of hardware that
can fail. Would it be better to choose Dual port BGP - Provider assigned
IP then to keep Dual port VRRP s...
So I would be better of choosing BGP according to the docs below?
https://docs.equinix.com/en-us/Content/Interconnection/EIA/EIA-config-options.htm
or can I also place 2 dumb switches above the fortigates?