Hello, Quick question: In order to allow Skype to continue to function
after putting P2P blocking in place I had place a monitoring rule
explicitly for Skype above it. This allow access to Skype but fills up
my logs with constant entries. What's the ...
Hello, I've been running dual wan connections using ECMP Weighted Load
Balance on my FWF80CM (v4 MR3 Patch 15) for a couple of years now. The
solution has worked out pretty well but now I want to change this design
to a more manual setup to improve c...
All, I' ve ran into this situation once before (outlook 2013/Pop3) but
eventually the issue went away either with updates or some other unknown
reason. I have W7 with Outlook 2007 client running a POP3 account.
Sometimes when Forticlient is enabled P...
Can anyone confirm for me weather the 20C is able to change the lan
interface from " Switch Mode" to " Interface Mode" ? The option is there
but after the required reboot the unit stays in " Switch Mode" . I' ve
tried removing all policies and config...
Hello, I have a Fortigate 20C and will be purchasing a FortiAP-210B to
add wireless to our network. How do I display the Wifi management in the
FortiOS web gui on the 20C? I' m running ForitiOS v4 MR3 Patch 14.
Thanks!
This is a 20C running version 4.0 MR3 Patch 14. My goal is to fine tune
what is logged to forticloud. For the most part I'm having to delete
everything in Forticloud once a week due to the 1GB limit. This business
doesn't have a need for the features...
Thanks for this Ede. I guess I'm so used to finding most of the features
I need in the gui that I forget that there is more under the hood in the
cli. Also, a related question. How do I configure for FortiCloud? I have
another unit that is connected ...
All, I've completed what I've set out to do which was to de-configure my
weighted load balancing setup on my dual WAN FWF-80CW. So far everything
is working the way I wanted but I have a couple of questions on some
things I ran across in the process....
FYI I ran into this same issue awhile back.
https://forum.fortinet.com/tm.aspx?m=113423 We've since moved on from
using the POP3 server so obviously we don't have the issue but I will
say I remember seeing some improper AUTH strings from the client i...
