Dear Sirs, please help me with this problem that occurred today. I have
5 users who have not been able to log in to Forticlient on their Windows
computers. The VPN reaches 40% and then returns to the credentials
stage, without displaying an error mes...
Dear, please help me in this case: I have a Fortigate 100F which was
return to the factory and configured as an edge in another
datacenter.The internet provider gave us a private WAN IP x.x.x.x; but
to go out to the internet, we must do it through a ...
Dear AllGood afternoon I am requesting your help with removing a phase1
ipsec vpn from the secondary HA. After generating an Ipsec VPN for some
tests, I proceeded to eliminate it and a few days later the HA was not
synchronized. When I checked the co...
Hello, the laptop with the problem was checked and it has TLS 1.2 and
1.3 by default.Now we are trying to enable WEB mode in the VPN and the
user I am using is validating if it was able to authenticate.
Hello, the version is v7.2.10 build 1706 (Mature) FortiGate 100F. The
Forti Client versions that have been tested are from 4.2.4.0972 to
7.4.1.1736 and 7.4.0.1658. We have users on Azure with SAML and locally.
We do not use MFA and IDP SAML is not us...
Dear, thank you very much for your comment.It was solved by downloading
the backup of the correct firewall and changing the name of the firewall
with the problem. After loading it, it synchronized. It had to be done
manually connected via console.
Dear, thank you very much for your comment. It was solved by downloading
the backup of the correct firewall and changing the name of the firewall
with the problem. After loading it, it synchronized. It had to be done
manually connected via console.
Dear, thank you very much for your comment. I had performed this test
before with the information found in various forums, but the problem
persisted. The solution was as indicated above, the fortiguard log was
disabed.
