I’m using Fortilink to manage switches from the Fortigate. When
searching to find the port for a device MAC I can dump the mac table
using this command: # diag switch-controller switch-info mac-table This
gives me pages and pages since I have 25 Fort...
The "diag user-device-store ..." is really clunky and hard with having
to vary the -A syntax depending on the device return. The result is
there none-the-less.I'm guessing Device Inventory is now Assets &
Identities > Assets in 7.6. In there, I was a...
I had a similar issue a while back where I was asking why only a few
days of logs for ~1,500Gb of storage. I ended up upping the CPU and
memory quite a bit to fix the issue. I think the internal SQL database
was staved and couldn't complete processin...
I would open a support ticket on this one. I have a hub with 20 spokes,
roughly 80 tunnels (2x2). The hub has a SLA for each site with the four
tunnels to the site. I then have a SDWAN rule per site with the
destination IP range and the four tunnels....
With the FGT (7.4.6) having the local-in config (manually applied) and
FMG not having this unit assigned to any local-in polices in Policies &
Objects, they get removed on the next push, unless you're specifically
referring to only pushing device con...
