I've been at this for a couple days so I'm hoping someone can help. This
used to work until I did a factory reset. I just updated my licence.
LAN/WAN is working just fine, I'm on it right now. Model: FortiGate 40F
Firmware: v7.0.13 build0566 (Mature)...
I think the real solution is people are trying to browse to 192.168.1.99
and not getting a response despite being able to ping it is that you
need to use https: https://192.168.1.99 That drove me crazy for an hour
so I thought I'd update the thread.
uggg you're right. I was certain we were using the 40F as an AP for over
a year and even had to recheck the spec
https://www.fortinet.com/content/dam/fortinet/assets/data-sheets/fortigate-fortiwifi-40f-series.pdf
There was indeed an AP device danglin...
Thanks for the fast response. Yes, my config looks the same as the
settings in those tips - I added the SSID manually to the AP and
broadcast is enabled. I went through this process again and found that
after adding a bridged ssid the Profile FAP221E...
