Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
bsautner
New Contributor

ssid not broadcasting

I've been at this for a couple days so I'm hoping someone can help.  This used to work until I did a factory reset.  I just updated my licence.  LAN/WAN is working just fine, I'm on it right now. 

 

Model: FortiGate 40F

Firmware: v7.0.13 build0566 (Mature)

 

I just want a basic WIFI AP Bridge - All of the docs and video say to enable the Managed FortiAPs but I don't have any listed.  When I try to add one using my 40F serial number is says Invalid Serial Number

 

I go through the setup where I: 

  • Wifi & Switch Controller -> SSIDs -> New SSID Bridge Mode with SSID name and password
  • Wifi & Switch Controller -> FortAP Profiles -> New Profile -> Use Defaults and I just add SSIDs manually and add the above SSID to both channels.

Everything seems to be up I just can't see or join the network from a wifi devices.

 

Screenshot 2023-11-15 085656.pngScreenshot 2023-11-15 085607.png

 

I don't remember having to do more than this the first time I set it up. 

1 Solution
hbac
Staff
Staff

Hi @bsautner,

 

FortiGate doesn't have Wifi antenna which means it is not capable of broadcasting SSIDs. Do you have a FortiAP or a third party access point configured? 

 

Regards, 

View solution in original post

4 REPLIES 4
Sheikh
Staff
Staff

Hello @bsautner 

 

Have you checked these technical tips ?

 

https://community.fortinet.com/t5/FortiAP/Troubleshooting-Tip-Bridge-mode-SSID-needs-to-be-added-man...

 

https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-broadcast-SSID-s-in-a-multiple-VDOM...

 

https://community.fortinet.com/t5/FortiGate/Technical-Note-How-to-enable-and-disable-broadcast-of-SS...

 

regards,

 

Sheikh

**If you come across a resolution, kindly show your appreciation by liking and accepting it, ensuring its accessibility for others**
bsautner
New Contributor

Thanks for the fast response.  Yes, my config looks the same as the settings in those tips - I added the SSID manually to the AP and broadcast is enabled.  I went through this process again and found that after adding a bridged ssid the Profile FAP221E-default appeared automatically and I used that.  Before I added on manually.  Still not working though

 

Screenshot 2023-11-15 092914.pngScreenshot 2023-11-15 092808.png

hbac
Staff
Staff

Hi @bsautner,

 

FortiGate doesn't have Wifi antenna which means it is not capable of broadcasting SSIDs. Do you have a FortiAP or a third party access point configured? 

 

Regards, 

bsautner
New Contributor

uggg you're right.  I was certain we were using the 40F as an AP for over a year and even had to recheck the spec https://www.fortinet.com/content/dam/fortinet/assets/data-sheets/fortigate-fortiwifi-40f-series.pdf 

 

There was indeed an AP device dangling in the back of the cabinet.  Thanks! 

Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors