Re: ebgp

sta · 01-16-2024

Tim, your config seems correct, except for maybe the prefix used for the range command. As it is now, it doesn't cover the routes you show (10.11.200.x), assuming those are the ones you're referring to. In the diagram, the suggested summary is 10.11....

sta · 11-06-2023

I believe fsw uses by default VLAN 1 config switch global set fortilink-p2p-native-vlan 1 end What is the output of: execute switch-controller get-conn-status from the FGT ? You could also try using L3 Technical Tip: FortiLink mode over a layer-3 net...

sta · 11-06-2023

as you have two eBGP peers, do you mean receiving inbound traffic for the network 193.107.48.0/24 from the AS 42337 ? If that's the case, you'd need a route map to advertise routes to the less preferred eBGP peer with a longer AS Path config router p...

User Statistics

User Activity

Re: OSPF route summarization on ABR

Re: How to manage fortiswitch via fortilink over non fortiswitches

Re: ebgp

Re: ebgp

Re: How to manage fortiswitch via fortilink over n...

Re: ebgp

User Statistics

User Activity

Re: OSPF route summarization on ABR

Re: How to manage fortiswitch via fortilink over non fortiswitches

Re: ebgp

Re: ebgp

Re: How to manage fortiswitch via fortilink over n...

Re: ebgp

You are leaving our website