Troubleshooting Tip: 'License has been uploaded' issue

[JBarrera]

Description	This article describes how to troubleshoot the issue related to FortiWeb GUI showing 'License has been uploaded'.
Scope	FortiWeb-VM v7.2.
Solution	This is assuming that the VM has already full internet access or can otherwise reach the FortiGuard servers. Troubleshooting Tip: Unable to connect to FDS servers If the issue is not solved continue with the 2 Workarounds: Disable ANYCAST: Downgrade to the old version. Disable anycast in the old version. Enable it first: FortiWeb1 # config system global FortiWeb1 (global) # set fortiguard-anycast enable FortiWeb1 (global) # end And disable it again to make sure it is disabled: FortiWeb1 # config system global FortiWeb1 (global) # set fortiguard-anycast disable FortiWeb1 (global) # end upgrade the firmware again to v7.2.0. Upgrade to 7.2.1 and above: Downgrade to the old version. Upgrade firmware again to 7.2.1.