Technical Tip: Secondary unit send daily local report automatically

[mattchow_FTNT]

Description	This article describes how to stop high availability (HA) secondary unit sending daily local report automatically.
Scope	FortiGate v7.4.
Solution	Weekly local report settings can be found in the configuration file as shown in the example below: config report layout     edit "default"         set title "FortiGate System Analysis Report"         set style-theme "default-report"         set options include-table-of-content view-chart-as-heading         set schedule-type weekly  <-----         set day Monday         set time 08:00 config system automation-trigger     edit "Weekly Trigger"         set trigger-type scheduled         set trigger-frequency weekly <-----         set trigger-weekday tuesday         set trigger-hour 10     next The false trigger of the daily report from the secondary unit can be observed especially in firmware v7.4 even if it is not configured as 'daily': If the unit is running in Active-Passive mode, it can be resolved by login from primary to secondary unit using commands as shown in this KB article: Technical Tip: How to access secondary unit of HA cluster via CLI Reboot the unit using the command 'execute reboot', enter, and then press 'y', it does not require downtime since it is a passive unit.