Hello Guys,We are adding firewalls to be managed by the FMG.we added all
the branches firewalls to the FMG in the HQ, but weirdly the Branches
firewall in the HQ which is the assembly point for our branches
firewalls has a problem when we trying to a...
Hello guys,I don't know if that an expected behavior or a bug, or if it
is configurable..when the users connect via the FortiClient (we tried
several versions) SSL VPN with a mobile token, they have two ways to do
it:inter the username and the passwo...
Hello Guys, I had an issue when using the Default web filter profile
with a blocked static URL for Youtube and other sites. I used the
certificate inspection not the Deep inspection option, and when the any
website should be blocked like Youtube, I g...
Hello Guys. I'm facing issue with the Hub and Spoke topology showed in
the picture, I added Spoke1 to newly to the topology and I can ping from
any device behind the spokes subnets to the subnet behind the spoke1 but
not the reverse!I can ping from (...
Hello Guys,I'm using DDNS configuration for the VPN connection from the
two sites.the configuration is straight forward using the wizard and the
DDNS configurations from both FortiGates are okay.however, the tunnel
down from both sides when I tried t...
Hi AEKFGT is on 7.0.14 and FMG on 7.0.12 the other FGTs that had no
issues were on the same version 7.0.14 also.FMG has license to manage 10
devices for now and currently 8 FGTs were added.
Hi All, the issue is resolved, but I did a work around, I enabled NAT on
the outgoing policy on Spoke1 all the other spokes and the hub working
without NAT enabled. something bad happened in the routing when it goes
out from spoke1 to the other spoke...
Hi Tom xSilver,thanks for your response. I will open a ticket with the
TAC.Regarding the NAT configuration, Unfortunately it is a must from
Sophos side, because I have a route on the core switch behind the
FortiGate to the same subnet! do you suggest...
