Hello everyone, I need your help in order to see if my approach, as
title explains, is correct.We have a client that have in his possession
2 FGT 3400E that are working in virtual cluster with VDOM A on Primary &
VDOM B on Secondary.For the conversio...
Hello davidse, You can always check your logs and find which port your
Firewall denies, when you are requesting the upload.Then you can add it
to your policy. Regards
Hello DType, I think the problem with the endless loading might be
caused by MTU. I suggest to try lower it to like 1399 and try again to
connect.In my country, some ISPs have problem like this and we are
forced to lower MTU in order to connect.
Hello, For your internal users to access your server from the public IP,
you need to configure a NAT hairpin.Basically imagine that your packet
does a loop and goes to your server.Try this guide, it had helped me in
the past:
https://community.fortin...
Hi dust, You can modify DNS from your Mac's end, at your nic's
interface. Or in the Fortigate's SSL - VPN Settings, change on Tunnel
Mode Client Settings the DNS Server to Specify (example: 8.8.8.8).
