Hello community. Currently I need to generate a report with
Fortianalyzer of the users that have not connected to the SSL VPN during
the last month.The users that are allowed to authenticate via SSL VPN,
are taken from an AD group, via a LDAP Server ...
Hello Community. I would like to ask for your help with a Fortigate 200F
(HA- A/A), with FortiOS 7.0.9.I have an IPsec VPN with a customer, who
has a Fortigate 400E on the same Firmware version. Through this IPsec
VPN I am extending a vlan via VXLAN ...
Solution that worked for me. After reviewing the case with Fortinet's
TAC, we found that the problem was indeed caused by the size of the
MTUs. The Windows client machines were trying to send packets with an
MTU greater than 1500 and in addition to t...
Thanks for the suggestion, I applied it last night on both Firewalls,
setting the cluster to Active-Passive mode but the behavior is the same.
I have also tried enabling the following with no result:config vpn ipsec
phase1-interfaceedit VPN_SiteBset ...
Hi funkylicious. I have changed the MTU size on the IPsec VPN interface
of site A and site B to (set mtu-override enable, set mtu 1372), but the
behaviour is the same. Even when client machines at Site A go to log in
while inside the domain (Domain C...