I have been trying to establish a VXLAN link to evaluate connecting two
buildings with the same L2 VLANs over the internet. The physical
setup:Site 1 Laptop 1 to untagged VLAN8 port on HPE Aruba 2530 Port on
HPE Aruba 2530 with VLAN5 and VLAN8 tagged...
We have two FG200F in active-passive HA config. Recently we tiggered
upgrade from 7.2.2 to 7.2.4 using the GUI "wizard" as we have done
multiple times before.When triggering the upgrade our two devices
were"A" Active"B" Passive The upgrade started on...
Thanks for the fast reply! I'm going to try soft switch instead of
virtual wire. You mention that the same packet appearing multiple times
in the same VDOM is a problem. Could I create a new VDOM, used only for
the VXLAN link config, to prevent the p...
Hi! I expected the VXLAN/Virtual Wire link to be transparent to most
functions in the Fortigate as it was described as just a virtual cable
between two switches. If I understand correcty, the traffic that exits
the VW port is not routable even it it ...
Update: I was able to get the vxlan link working by using set
npu-offload disable on the ipsec phase1-interface on both Fortigates.
Now I'm able to ping devices on both sides. I only get 250-300Mbit
throghput so it would be great if npu offload could...
Hi Hbac,I haven't configured any VLANs on the Fortigate ports connecting
to the switches. The 60F is "out of the box" and I only removed
internal5 from the default internal network. Port15 on the main firewall
is also removed from any other assignmen...
