Does FortiGate support specifying that the FortiGate to FortiManager
communication goes over a specific VRF, or is it only supported via a
Default VRF?
I have a FortiGate 201F, and was curious how FortiGate treats reply
traffic to a Loopback that's been tagged when it hits the FortiGate. If
I have a packet coming into the FortiGate destined to a Loopback, tagged
as EF for example, it seems as if the...
Having is issues using a Traffic Shaper Profile with Traffic Class IDs
to match traffic to shape based upon tos/tos-mask values. I will post
the config below, not sure what exactly is going on. Wondering if this
is even supported. This is off a Forti...
When an ADVPN shortcut is created, obviosuly the connection will go from
whatever ISP(s) you're using to the other Spokes Public IP(s). This
creates the transit connection for the tunnel to be created in the first
place. So, do you have to configure ...
Thanks for the information. I just have two questions if you don't mind.
How do I make sure a specific policy "allows" reply traffic to maintain
the DSCP value, and how to do I make sure the FortiGate will trust the
DSCP value of incoming packets?
