Hello everyone,I am using FortiGate 60F with FortiOS 7.2.8. When I
opened the Device Inventory Monitor in the management console, it
detected as many as 5000 devices. Normally, there are fewer than 100
devices.No IP addresses are displayed, and the M...
Hi all, I'm using FortiOS 7.2.6 on a FortiGate 60F. The current firmware
is v7.2.6 build 1575. However, this version has a critical vulnerability
[CWE-787]. You can find more details here:
https://fortiguard.fortinet.com/psirt/FG-IR-24-015. I attempt...
This issue is similar to Article Id:261221.On FortiOS 7.2.4 ,SSL-vpn
with vne-tunnel is worked.But after upgrade to 7.2.5(FortiOS v7.2.5
build1517), ssl-vpn port doesn't answer to any request.* FortiClient or
Browser request was reached to FG,(the re...
Hi allI have updated to FortiOS 7.2.3.And then I realized following bad
configuration.----FG60F # config system email-serverFG60F (email-server)
## set reply-to noreply@example.comcommand parse error before
'reply-to'Command fail. Return code -61FG60...
I tried to capture mac address on the next of fortigate v170 side L2
intelligent switch.* The switch's MAC address-table aging time is over
10 days. uplink----FG ---*----L2SW**-----other devices.*It has only one
connection , and it runs vlan170.**FDB...
@Debbie_FTNT Thank you for your response. >#dia user device list I have
the output of the command. Like vd root/0 b0:00:00:00:00:00 gen 248084
req OHUSA/3ecreated 1969194s gen 228011 seen 1916738s v170 gen
183728.... there are so many output. I found...
@ozkanaltas Thank you for your response. I also considered the
possibility of spoofing, but the number of detected devices is too large
for that. Additionally, the detected devices have MAC addresses like
00:00:00:00:00:00, 00:00:00:00:00:01, etc., w...
