Description This article describes how to assign DHCP range to the users
from the secondary IP address assigned on the interface. Scope
FortiGate. Solution By Design, it is not possible to assign a DHCP
address from the secondary IP address assigned ...
Description This article describes how to install FortiClient if the
error 'The digital signature on the installer package is invalid.
Installation aborted' appears when trying to install it from the
products download page on the website. Scope Forti...
Hello, If the issue still persists, Kindly check the below settings as
well from the Fortigate side.
https://community.fortinet.com/t5/FortiGate/Troubleshooting-Tip-SSL-VPN-slow-file-transfer-issue/ta-p/230161
Hello, May I know the Forticlient version that you are using? Also try
to uninstall the Forticlinet and try the same or a different client
version.
https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-download-FortiClient-and-FCRemove-exe...
Hello, Once the phase 2 selectors are added on either end of the vpn
tunnel.1) Make sure there is a static/dynamic route to the remote
address(mentioned in the phase 2 selector) -verify the routing table -
get router info routing-table details x.x.x....
Hello, Kindly check the timers as mentioned in this article:
https://community.fortinet.com/t5/FortiGate/Technical-Tip-SSL-VPN-timers-explanation-and-SSL-VPN-Login/ta-p/203615
-You can use the below command to check that on Fortigate if the
Forticlie...
Hello, If you want to know what services can be edited in the
local-in-policy, you can run the below command with a question mark and
that will show you a list of services that you can use in localin-policy
config firewall local-in-policy edit x --->...
