I need to setup a VPN tunnel to Google with NAT, so I thought I would
look at how my Fortigate was set up ,before I took the network job, for
VPN and NATing. I see in the Policy and Objects an interface that is a
VPN Tunnel Type and also says it's a ...
We stumbled on a known bug, ( See the release notes for 2.6.4 ) that
related to the " wad " process. I think it's a memory leak of some sort.
Our Fortogate 3000D would stop passing traffic. The first symptoms were
people on VPNs losing connection and...
We are having an issue where users, using our VPN connection, with the
Fortinet VPN client and using the Mitel Connect software do not get the
audio portion of a phone call. Neither side of the call can hear each
other. The this feature with "soft ph...
I need to install the CA agent since I have 5 domain controllers, but I
can't find a download for the agent ( it's supposed to be part of the
FSSO_Setup.exe file) .
We would like to be able to better identify users with our Fortigate,
when we view FortiView, rather than just getting IP addresses to hunt
down. Sometimes, the device name is shown, but not always and often I
have to hit "Sources" under FortiView a ...
Yes. In our case, it was NAT enabled on the incoming policy. We did
disable all the SIP stuff and change the ALG but non of those fixed the
issue. The SIP part of the connection worked. The calls were connected.
It was just the audio that didn't. A W...
We got our issue solved. In our case, UDP traffic coming from the VPN to
the inside could not get to port 10000 for UDP. Turning off NAT on the
VPN to Inside policy resolved the issue. We have NAT turned on , on the
outgoing policy still.
We're not using split tunneling, so that is not part of our issue. We
can ping from our VPN client to the Mitel server and from the Mitel
server to the client. So, that is different. I suspect this was a good
part of our issue..."Noticed the issue wa...
