Description This article describes how to resolve a scenario where users
are able to access a website but some content or page redirects do not
load. Scope FortiGate - FortiOS. Solution In this scenario the use of
firewall policies based on FQDN dest...
Description This article describes the common issue with the use of
Virtual server VIP configuration when traffic mismatches the firewall
policy configured with the VIP or even in the case of this traffic does
match the policy however traffic logs ar...
Description This article describes an issue where interfaces x5-x8
interfaces connected to 25G SFP modules go down after upgrading to
FortiOS 7.4.3 while x1-x4 interfaces stayed up on the same firewall.
This is an issue limited to specific FortiGate ...
Description This article describes how to deploy FortiGate as the SAML
IDP for FortiManager on-prem and possible issues. The article assumes
that FortiGate is already running a compatible version with FortiManager
and both devices are in sync. Scope ...
Description This article describes recommendations when assigning a new
user in FortiCloud Portal fails due to reaching quota limit while there
are still available tokens in the pool. Scope FortiGate - FortiToken
Cloud Solution Check if the license i...
Hi jomof, Yes it looks like the execution of the script expired. Do you
get any notification on the tftp server that there was an attempt to
connect or that does not even happen. Have you tried to rebuild the
script specially the trigger and test aga...
Hello jomof, Thank you for reaching out. My understanding is that the
backup works through the stitch however it does not execute at the 25th
minute of every hour according to the screen shot. You can try
troubleshooting steps for automation stitches...
Hi Luca, Technically with the use of pac file you can force this
behaviour of no authentication by editing the pac file I believe but it
would be a white list kind of configuration. If the goal is to never
authenticate when accessing any url then pro...
Hello adrianit, Thank you for your inquiry. There are multiple ways to
deploy a backup ipsec tunnel including the way the failover happens. The
very basic step would be to achieve this with static routes using the
following logic:- setting up backup ...
