HelloI am new to fortinet and recently placed a fortinet device in my
home network. It is a very simple setup to get me started and try more
ambitious things later. The ISP router is having the WAN connection to
the internet and the LAN side connects...
HelloI am new to Fortinet and currently stuck on something very simple
and would need some help.I am simply trying to enable port forwarding
from the WAN interface to the LAN interface so that if a request comes
in on a WAN interface on a particular ...
OK, there is some progress but still got issues. With the config now
added the channels come up with signal but exactly after 5 - 6 seconds
the signal drops out and i get a message signal lost and this is
happening for all the channels. Below is the ...
Hello VishalThanks for sharing the document. I did had a look at this
document already and I only applied the first half part of the changes
suggested, didnt realise there are 2 steps. I will try the second set of
instructions shortly and will try to...
Good spot. Just that one single change and it worked. I have also
removed the enable NAT on the policy, basically I was trying everything
to check and see if it could make it work.Thanks
