Hello
I am new to Fortinet and currently stuck on something very simple and would need some help.
I am simply trying to enable port forwarding from the WAN interface to the LAN interface so that if a request comes in on a WAN interface on a particular port the request gets forwarded to the local device on the LAN. Have setup as below:
The problem is when I try to access on the wan IP (192.168.70.34), I am not able to access the RDP server. Not sure what I am missing here but glad if someone can help on this.
I have checked the guide on the below link but st
Thanks
Solved! Go to Solution.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
The "Destination" of the VIP policy needs to be the VIP "RDP" you configured. In the KB's case it's "Test". I don't recommend enabling NAT on the policy unless you need to hide the source IPs before delivering the packets to the server.
Toshi
The "Destination" of the VIP policy needs to be the VIP "RDP" you configured. In the KB's case it's "Test". I don't recommend enabling NAT on the policy unless you need to hide the source IPs before delivering the packets to the server.
Toshi
Good spot. Just that one single change and it worked. I have also removed the enable NAT on the policy, basically I was trying everything to check and see if it could make it work.
Thanks
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1713 | |
1093 | |
752 | |
447 | |
231 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.