Hi tthrilok, Sorry, just saw this. I've tried doing another dump as
you've mentioned, and something strange is happening. When I'm pinging
from the hub to site B, this is what the hub sees:Hub # diag sniffer
packet hub 'icmp' 4 0 a interfaces=[hub] f...
Yes, my setup is based on guides for ADVPN, although I later learned
that ADVPN doesn't work with IKEv2. That is indeed where the "disable
net-device" configuration came from. Thanks for the help though!
Hopefully someone with more experience with AD...
Just to confirm, net-device should be set on the hub, is this correct?
I've tried it and the result was that I couldn't ping any tunnel
interface IP from anywhere (hub, site A, or site B). On the hub, with
net-device enabled, the routing table shows:...
Hello, I have tried enabling NAT-T, however, there was no observable
change. The problem still remains the same. I've also made sure to add a
policy that allows all spoke to spoke traffic on both site A and site B.
My eventual goal is to use BGP insi...
