Hello, We have set up a Site-to-Site VPN tunnel between 2 FortiGate, the
IPsec VPN tunnel works very well. We also have an SSL VPN on the
FortiGate A and FortiGate B. This is restrictive for users who
telecommute, they must use one of the 2 SSL conne...
Hello, I need help solving a routing problem. HQ and Brand Fortigate FW
are connected via VPN IPsec Site to Site, everything is working fine, we
can ping and have access from servers and ressources LAN to LAN from
both side. I created a static route ...
Hello,I would like to have some help, i have set up a IPsec Tunnel VPN
Site-to-Site between 2 Fortigate. It's working well HQ and Branch are
connected.Tunnel is up 24/7, i can ping Branch's Lan to HQ's Lan without
problems(Pcs, FG, Routers, wireless ...
Phil Lofthouse wrote:Hi David. It looks like you will need an additional
Phase 2 configuring on the Branch FortiGate, to allow 10.0.151.0/24
(local) to have a tunnel to 192.168.100.0/24 (remote), with the opposite
configured on the HQ FortiGate. Rega...
Phil Lofthouse wrote:Hi David. It looks like you will need an additional
Phase 2 configuring on the Branch FortiGate, to allow 10.0.151.0/24
(local) to have a tunnel to 192.168.100.0/24 (remote), with the opposite
configured on the HQ FortiGate. Rega...
Yurisk wrote:What have you set as Proxy ID in Phase 2 configuration of
VPN sites, specific networks or 0.0.0.0 ? In Phase 2, I have set Local
Address Branch-to-HQ_local 10.0.151.0/24 and Branch-to-HQ_remote
10.0.78.0/24. Thank you in advance, Regards...
