PROBE FAILED WHEN ADDING FORTIANALYZER TO FORTIMANAGER

[aidnet]

hello team i am getting probe failed when i adding fortiAnalyzer to FortiManger, i have configured the FortiAnalyzer interface to be managed with fortimanager

[ozkanaltas]

Hello @aidnet ,

I didn't face that error before but when I did resourcing about that I saw three important points. Could your situation match the following key points?

To add a FortiAnalyzer to FortiManager, they both must be running the same OS version, at least 5.6 or later.

If FortiAnalyzer Features are enabled, you cannot add a FortiAnalyzer unit to FortiManager. See FortiAnalyzer Features.

In addition, you cannot add a FortiAnalyzer unit to FortiManager when ADOMs are enabled, and ADOM mode is set to Advanced.

https://docs.fortinet.com/document/fortimanager/7.0.4/administration-guide/654379/add-fortianalyzer