Re: fortisandbox and SDWAN rules

asoni · 10-29-2024

Description This article describes how to run BGP debugs for a specific neighbor when multiple BGP neighbors are configured. Scope FortiOS 7.2.x and above. Solution When multiple BGP neighbors are configured and it is required to focus only on a spec...

asoni · 08-18-2024

Description This article describes how FortiGate updates NTP status when using a redundant NTP server. Scope FortiGate. Solution It is possible to use multiple NTP servers in FortiGate via CLI with either FQDN or an IP address. Following is the confi...

asoni · 08-11-2024

Description This article describes link health monitoring, which measures the health of links by sending probes to a server with FQDN. Scope FortiGate. Solution It is possible to use FQDN as a server under the link monitor. config system link-monitor...

asoni · 07-28-2024

Description This article describes troubleshooting tips for some scenarios with FortiGate acting as Dialup IPSec Hub and multiple Dial-in Client FortiGates. Scope FortiGate. Solution Scenario 1: Losing connectivity from Hub FortiGate overlay IP towar...

asoni · 04-23-2024

Description This article describes an option to remove the username and password field from the SSL VPN web portal login page and only keep the Single Sign-On option as an available login method. Scope FortiGate. Solution There might be scenarios whe...

asoni · 10-15-2024

Hello, When one of the link goes down in SDWAN, does that default route getting removed ? You can check available default route using the following command: # get router info routing-table details 0.0.0.0 Also, are you able to ping below FQDN when th...

asoni · 07-24-2024

Greetings, Since, you're seeing the traffic coming to Fortigate but getting denied via policy id 0, I would recommend to check whether proper user group is added in policy or not. also, please check source and destination interface and subnets/servic...

asoni · 04-07-2024

Greetings, you can enable https, ping and ssh under interface settings in order to take GUI access, SSH access and to ping Fortigate interface from your server. you can also refer following document to check best practices for admin access.https://do...

asoni · 04-01-2024

Greetings,you can refer following link to get more details about ADOMs.https://docs.fortinet.com/document/fortianalyzer/7.4.2/administration-guide/993790/administrative-domains-adomsBasically, you can use ADOMs to group devices and restrict administr...

Re: FortiMail Quarantine Profile · 04-01-2024

Greetings, Have you checked 'domain group' option under access level. I'm not sure whether that will work or not. Probably, you can refer following document.ref link: https://docs.fortinet.com/document/fortimail/7.4.2/administration-guide/347528/conf...

User Statistics

User Activity

Technical Tip: Capture BGP debugs for a specific neighbor

Technical Tip: Redundant NTP server behavior in FortiGate

Technical Tip: Link monitor using FQDN

Troubleshooting Tip: Connectivity issue between Dialup hub FortiGate and multiple Dial-in client FortiGates

Technical Tip: Only keep the Single Sign-On option for the SSL VPN web portal login page

Re: fortisandbox and SDWAN rules

Re: problem accessing destination ip from SSL VPN

Re: Want to enable ping and web access on SP1 port of FGR-60F

Re: Fortianalyzer VM

Re: FortiMail Quarantine Profile

Re: fortisandbox and SDWAN rules

Re: problem accessing destination ip from SSL VPN

Re: Want to enable ping and web access on SP1 port...

Re: IPsec VPN Remote Access ip issue

Re: Active Active Deployment in GCP

Re: Fortianalyzer VM

Re: FortiEDR

KCS